You don’t usually think much about your plumbing in Lubec-until something goes wrong. If you are having a problem or are considering replacing some of your pipes or perhaps your water heater, it’s not a bad idea to check into what technology has to offer these days.
Even things as seemingly dull as your kitchen sink or bathroom pipes are the subjects of research on a regular basis. Companies want to stay ahead of the curve, so they create new technologies all the time.
Basic Safety For Home Plumbing Projects
When undergoing any home improvement project there are safety issues that come into play. Potential hazards can be electrical in nature, and could cause serious injuries including burns and death. Although common sense should prevail, it doesn't always. Making sure you're aware of any potential electrical safety hazards should be the first part of any procedure, including plumbing. Sacramento residents should understand the possibility of electrical danger if they choose to perform their own plumbing projects.
Shut The Electricity Off
Never assume the electricity to a piece of equipment has been shut off. Before you attempt to service anything that has an electrical component to it, disconnect it from the power supply feeding it. This could mean either unplugging it or shutting the power off at the source such as an electrical panel that uses either fuses or circuit breakers. If you do need to shut the power supply off at the panel box, be sure to put some type of warning on the box indicating that you have intentionally shut down the circuit.
Test The System
Once the power supply has been cut off, test the circuit to be sure there is no power going to it. The easiest way to do this is to attempt to turn on the piece of plumbing equipment you are about to work on. If it doesn't turn on, then you can be confident that you have successfully cut off the power, and it is safe to begin plumbing. Sacramento residents and business owners need to always take this precaution when working on any system that is electrically charged.
Plumber - Facts About Commercial Plumbing
People often have questions about installing CPVC pipe. They need new water lines and want to know if CPVC pipe is a good choice. Many want to know if it is really as easy to install CPVC plumbing as it looks. I mean, it requires no special tools and is really easy to put it together. You just glue it together, what could be easier?
Like most things in life, it's not quite that simple. The truth is, CPVC pipe is a perfectly good product and can be an excellent choice for water pipes, but you do need to know a few things to do it right. For starters, you need to be able to properly size the pipe in your system and you need to be able to design the piping layout efficiently. There are also some things you need to know about CPVC piping installations in particular.
Here are a few tips to help you get a good system.
Strap It Right
Strap CPVC every 4' horizontally and at least once between the floor and ceiling vertically. Use plastic support hooks and get the kind that hold the pipe a little off of the wood. CPVC expands and contracts like all plastic pipe and if it is fastened too tightly against the framing it can make a lot of popping and squeaking noises as time goes on.
Stay Away From Heat Sources
Don't run CPVC pipes too close to heat sources, such as can lights or flue vents. A good rule of thumb is to stay at least 12" away from these kinds of things.
Check All Products For Compatibility
Last of all make sure that any pipe dope or other chemicals that come into contact with any part of the piping system are approved and listed as safe for CPVC. Some chemicals can have a damaging effect on the plastic pipe, causing failures months and even years later. That doesn't mean CPVC is not a good product, just pay attention to what you use with it.
These tips should help your next CPVC project be a success!
Copyright 2008 Bryan Stevens
Basic Safety For Home Plumbing Projects